SMART EQ forfour Owner's Manual page 177

not suitable for higher speeds. There is a
risk of accident.
You should therefore adapt your driving
style accordingly and drive carefully. Do
not exceed the specified maximum speed
with a tyre that has been repaired using
tyre sealant.
The maximum permissible speed for a tyre
sealed with tyre sealant is 80 km/h.
!
After use, excess tyre sealant may run out
of the filler hose. This could cause stains.
Therefore, place the filler hose in the plas-
tic bag that contained the TIREFIT kit.
H
Environmental note
Have the used tyre sealant bottle disposed
of professionally, e.g. at a qualified spe-
cialist workshop.
Comply with the manufacturer's safety
instructions on the sticker on the tyre infla-
tion compressor.
Filling with tyre sealant
X
Leave foreign bodies which have penetra-
ted the tyre in the tyre.
X
Remove the vehicle tool tray.
X
Remove the TIREFIT kit, consisting of a
tyre sealant bottle and a tyre inflation
compressor, from the vehicle tool kit.
X
Affix the 80 km/h maximum speed sticker to
the instrument cluster within the driver's
field of vision.
Sealing tyres using the TIREFIT kit
X
Unwind plug : with the cable from tyre
inflation compressor ;.
X
Remove hose A from the bottom section of
tyre inflation compressor ;.
X
Unscrew the cap from tyre sealant bot-
tle ?.
X
Connect hose A.
X
Remove the valve flap from valve E on the
faulty tyre.
X
Unscrew the cap from filler hose =.
X
Screw filler hose = onto valve E.
X
Insert connector : into the cigarette
lighter socket or the 12 V socket.
X
Turn the key to position 1 in the ignition
lock.
X
Press on/off switch B on tyre inflation
compressor ; to position 1.
The tyre sealant is pumped into the tyre.
The pressure may briefly rise to approx-
imately 600 kPa (6.0 bar/86 psi) in pressure
gauge C.
i
Preventing damage to the tyre inflation
compressor
Do not switch off the tyre inflation com-
pressor during this phase.
X
Let the tyre inflation compressor run for a
maximum of 15 minutes, then allow it to
cool down.
The tyre pressure must be at least 180 kPa
(1.8 bar/26 psi) in pressure gauge C.
Allow any leaking tyre sealant to dry. It can
then be removed like a layer of film.
Have any clothing stained with tyre sealant
cleaned as soon as possible with perchloro-
ethylene.
175
Z