SMART EQ forfour Owner's Manual page 102

Using the accessories
100
i
To avoid air bubbles or dirt getting under
the surface, observe the following tips:
Do not bend the protective film.
R
Do not touch the adhesive surface of the
R
protective film.
Use disposable gloves to affix the pro-
R
tective film.
X
Carefully clean the display of the iPad
X
The adhesive surface of the protective film
is protected by a thin transparent backing
film. Peel off half the backing film from the
protective film.
X
Affix the upper edge of the protective film
to the edge of the display by applying gen-
tle pressure.
X
Slowly peel off the backing film from the
protective film. At the same time, carefully
apply pressure to the protective film with
a suitable implement or plastic card such
as a credit card and smooth over the sur-
face.
If air bubbles or dirt particles are present
after attaching the protective film, proceed
as follows:
X
Carefully remove the protective film from
the display.
X
Remove dust and impurities.
X
Attach the protective film once again.
Inserting an iPad Air
X
Turn attachment : so that the opening
faces the vehicle interior.
X
®
Insert iPad with Lightning connection ;
first into the attachment until the attach-
ment audibly locks.
X
Move the attachment to the desired posi-
tion.
®
.
®
Charging the iPad Air
®
The iPad Air can be charged via the USB port
on the tablet bracket.
This additionally requires:
a suitable USB adapter for the 12 V socket
R
a suitable USB data cable for the USB
R
adapter and USB port on the tablet bracket
X
Insert the USB adapter into the 12 V socket
X
Connect the USB data cable to the USB
adapter and the USB port on the tablet
bracket
Removing an iPad Air
®
i The iPad is not designed for the extreme
temperatures which can be reached in a
vehicle and may be damaged. For this rea-
son, it is not recommended to leave the
®
iPad in a parked vehicle.
X
Turn the attachment so that the opening
faces the vehicle interior.
X
Press button ; on the back of the tablet
bracket.
The attachment unlocks and the iPad
pushed a little out of the bracket.
X
®
Remove iPad
:.
®
via the USB port
®
®
is