Konica Minolta bizhub C352 Installation Manual page 7

IX. Connecting the Power Cord and
Mounting the Accessory parts
1. Connect the power cord.
2. Fit the cord clamp furnished with the machine
over the power cord (one screw furnished with
the machine).
Note:
This step may not be performed depending on the
applicable marketing area.
3. Plug the power cord into the power outlet.
4. Attach the cap A and B furnished with the
machine.
5. Attach the connector cover furnished with the
4038IXC028DA
machine.
6. Install the cover furnished with the machine to the
machine at the location shown on the right.
Note:
This operation should be performed only when the
Paper Feed Cabinet and the Desk are not
9J06IXC025DA
mounted.
C4004U139CA
E-7
9J06IXC016DB
9J06IXC017DA
9J06IXC018DA