Affixing The Label - Konica Minolta bizhub C352 Installation Manual

XVII. Unit Change
Note:
This function allows the user to select the type of
message that will appear when the replacement
time arrives for each of the different units.
1. Select the Unit Change function as follows:
System 2 → Unit Change.
2. Select the appropriate message type for each
unit.
3. Touch "END."
XVIII. List Output
1. Load the 1st drawer with A4
paper.
2. Touch "List Output."
3. Touch the "Machine Management List" and press
the start key.
The list will be output.
4. Output "Adjustments List", "Service Parameter",
and "Fax Setting List" also by pressing the
respective display and pressing the start key.
5. Touch "END."
6. Touch "Exit" on the Service Mode Screen.
7. Turn OFF and ON the Main Power Switch.
Note:
When displayed the Service Mode screen, be sure
to turn off the main power after exiting the Service
Mode screen and wait for 10 seconds or more
before turning on.
XIX. Affixing the Drawer Labels
Affix the drawer label.
4037IXE535DA
For loading the paper as well as setting the paper
type, refer to the User's guide.
XX. Affixing the Label (Legal Restrictions
on Copying)
Affix the label (Legal Restrictions on Copying) to the
position shown below.
Note:
or Letter
This step may not be performed depending on the
applicable marketing area.
9J06IXE197DA
9J06IXE198DA
E-12
Label
Drawer Label
4038IXC029DA
9J06IXC026DA