Lenovo V130–20IGM AIO User Manual And Hardware Maintenance Manual page 51

1. Remove any media from the drives and turn off all connected devices and the computer. Disconnect all
power cords from electrical outlets and disconnect all cables from the computer.
2. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently lay
it down so that the computer cover is against the surface and the screen is facing up.
3. Remove the tilt-only monitor stand base. See "Replacing the tilt-only monitor stand base" on page 17.
4. Remove the front cover. See "Removing the front cover" on page 17.
5. Remove the integrated camera. See "Replacing the integrated camera" on page 46.
6. Replace the LCD panel.
Figure 77. Removing the LCD panel
.
Chapter 4 Replacing hardware
47