Advertisement

Lenovo V330-20ICB AIO User Guide and
Hardware Maintenance Manual
Energy Star Machine Types: 10UK and 10UL

Advertisement

Table of Contents
loading

Summary of Contents for Lenovo V330-20ICB

  • Page 1 Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual Energy Star Machine Types: 10UK and 10UL...
  • Page 2 Important Product Information Guide and Appendix A “Notices” on page 49. First Edition (June 2018) © Copyright Lenovo 2018. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-...
  • Page 3: Table Of Contents

    Replacing the storage drive ..Replacing the internal microphone board ..Replacing the card reader ... © Copyright Lenovo 2018...
  • Page 4 Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 5: Chapter 1. Overview

    Serial connector (optional) Parallel connector (optional) Internal speakers (2) Screen Internal camera activity indicator When the indicator is on, the camera is in use. Internal camera shield control slider Used to cover the camera lens. Internal camera © Copyright Lenovo 2018...
  • Page 6 Used to listen to the sounds from your computer without using a headset or headphones. Screen Depending on the computer model, your computer screen might support the multi-touch feature. This feature enables you to use one or two fingers to interact with the computer. Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 7: Rear View

    Rear view Note: Your computer model might look slightly different from the illustration. Figure 2. Rear view VESA threaded holes (screws: M4 x 8 mm x 4 pcs) Optical drive activity indicator (optional) HDMI 1.4 out connector Optical drive eject/close button (optional) Power adapter connector Ethernet connector USB 3.1 Gen 1 connectors (3)
  • Page 8: System Board

    Used to secure a Kensington-style cable lock. System board Note: See “Front view” and “Rear view” for additional component descriptions. Figure 3. System board M.2 Wi-Fi card slot Internal camera connector Microprocessor socket Memory slot (DIMM1) Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 9: Machine Type And Model Label

    Power button board connector Machine type and model label The machine type and model label identifies the computer. When you contact Lenovo for help, the machine type and model information helps support technicians to identify the computer and provide faster service.
  • Page 10 Figure 5. Tilting the screen forward and back Figure 6. Turning the screen to the left and right Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 11: Chapter 2. Specifications

    Physical dimensions (without the computer stand) • Width: 477.2 mm (18.8 inches) • Height: 313.7 mm (12.4 inches) • Depth: 59.5 mm (2.3 inches) Weight (with the computer stand) (without the package) Maximum configuration as shipped: 6.4 kg (14.1 lb) © Copyright Lenovo 2018...
  • Page 12 Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 13: Chapter 3. Computer Locks

    Depending on the type selected, the cable lock can be operated with a key or a combination. The cable lock also locks the buttons used to open the computer cover. This is the same type of lock used with many notebook computers. You can order such a cable lock directly from Lenovo by searching for Kensington at: http://www.lenovo.com/support Figure 7.
  • Page 14 Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 15: Chapter 4. Replacing Hardware

    • When installing or replacing an option, use the appropriate instructions explained in this manual along with the instructions that come with the option. • In most areas of the world, Lenovo requires the return of defective CRUs. Information about this will come with the CRU or will come a few days after the CRU arrives.
  • Page 16: Locating Frus (Including Crus)

    Locating FRUs (including CRUs) Notes: • Some of the following components are optional. • To replace a component that is not in the list below, contact a Lenovo service technician. For a list of Lenovo Support phone numbers, go to: http://www.lenovo.com/support/phone...
  • Page 17 Figure 8. Locating FRUs (including CRUs) Self-service CRUs Non-CRUs Computer stand base Computer cover Computer stand bar Serial connector and parallel connector module cover Keyboard Heat sink Mouse Optical drive cable Power adapter System fan Power cord Optical drive holder Optical drive Optical drive bracket Optical drive bezel...
  • Page 18: Replacing The Computer Stand

    3. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently lay it down so that the screen is against the surface and the computer cover is facing up. 4. Replace the computer stand. Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 19 Figure 9. Removing the computer stand Figure 10. Removing the stand base from the stand bar Figure 11. Installing the stand base to the stand bar Figure 12. Installing the computer stand Chapter 4 Replacing hardware...
  • Page 20: Removing The Computer Cover

    Figure 13. Removing the cover of the serial connector and parallel connector module Figure 14. Removing the computer cover 7. Complete the replacement. See “Completing the parts replacement” on page 47. Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 21: Replacing The Optical Drive

    Replacing the optical drive Attention: Do not open your computer or attempt any repairs before reading the Important Product Information Guide. 1. Remove the computer stand. See “Replacing the computer stand” on page 14. 2. Remove the computer cover. See “Removing the computer cover” on page 16. 3.
  • Page 22 Figure 17. Inserting a straightened paper clip into the emergency-eject hole until the tray slides out Figure 18. Removing the optical drive bezel Figure 19. Installing the optical drive bezel Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 23 Figure 20. Closing the tray Figure 21. Installing the optical drive holder Figure 22. Installing the optical drive 4. Reinstall the removed parts. To complete the replacement, see “Completing the parts replacement” on page 47. Chapter 4 Replacing hardware...
  • Page 24: Replacing The System Board Shield

    4. Reinstall the removed parts. To complete the replacement, see “Completing the parts replacement” on page 47. Replacing the storage drive Attention: Do not open your computer or attempt any repairs before reading the Important Product Information Guide. Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 25 1. Remove the computer stand. See “Replacing the computer stand” on page 14. 2. Remove the computer cover. See “Removing the computer cover” on page 16. 3. Replace the storage drive. Figure 25. Removing the storage drive and the bracket Figure 26.
  • Page 26: Replacing The Internal Microphone Board

    2. Remove the computer cover. See “Removing the computer cover” on page 16. 3. Remove the storage drive. See “Replacing the storage drive” on page 20. 4. Replace the internal microphone board. Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 27: Replacing The Card Reader

    Figure 29. Removing the internal microphone board Note: Before you install the new internal microphone board, ensure that you disconnect the cable from the failing internal microphone board and connect it to the new one. Figure 30. Installing the internal microphone board 5.
  • Page 28: Replacing The Internal Speakers

    4. Remove the storage drive. See “Replacing the storage drive” on page 20. 5. Record the routing of the internal speaker cable, and then disconnect the cable from the system board. 6. Replace the internal speakers. Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 29: Replacing The Serial Connector And Parallel Connector Module

    Figure 33. Removing the internal speakers Figure 34. Installing the internal speakers 7. Route the new internal speaker cable, and then connect the cable to the system board. 8. Reinstall the removed parts. To complete the replacement, see “Completing the parts replacement” on page 47.
  • Page 30 Figure 35. Removing the serial connector and parallel connector module and the bracket Figure 36. Removing the serial connector and parallel connector module from the bracket Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 31: Replacing The System Fan

    Figure 37. Installing the serial connector and parallel connector module into the bracket Figure 38. Installing the serial connector and parallel connector module and the bracket 6. Connect the new serial connector cable and the parallel connector cable to the system board. 7.
  • Page 32: Replacing The Power Button Board

    2. Remove the computer cover. See “Removing the computer cover” on page 16. 3. Remove the system board shield. See “Replacing the system board shield” on page 20. 4. Replace the power button board. Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 33: Replacing The M.2 Solid-State Drive

    Figure 41. Removing the power button board Note: Before you install the new power button board, ensure that you disconnect the cable from the failing power button board and connect it to the new one. Figure 42. Installing the power button board 5.
  • Page 34 Figure 43. Removing the screw Figure 44. Removing the M.2 solid-state drive Figure 45. Installing the M.2 solid-state drive Figure 46. Installing the screw • Type 2 Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 35 Figure 47. Removing the screw Figure 48. Removing the M.2 solid-state drive Figure 49. Installing the M.2 solid-state drive Figure 50. Installing the screw 5. Reinstall the removed parts. To complete the replacement, see “Completing the parts replacement” on page 47. Chapter 4 Replacing hardware...
  • Page 36: Replacing The Coin-Cell Battery

    3. Remove the system board shield. See “Replacing the system board shield” on page 20. 4. Remove the M.2 solid-state drive. See “Replacing the M.2 solid-state drive” on page 29. 5. Replace the coin-cell battery. Figure 51. Disengaging the latch Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 37 Figure 52. Removing the coin-cell battery Figure 53. Installing the coin-cell battery Chapter 4 Replacing hardware...
  • Page 38: Replacing A Memory Module

    2. Remove the computer cover. See “Removing the computer cover” on page 16. 3. Remove the system board shield. See “Replacing the system board shield” on page 20. 4. Replace a memory module. Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 39 Figure 55. Disengaging the latches Figure 56. Removing a memory module Figure 57. Installing a memory module Figure 58. Securing a memory module with the latches 5. Reinstall the removed parts. To complete the replacement, see “Completing the parts replacement” on page 47.
  • Page 40: Replacing The Wi-Fi Card

    3. Remove the system board shield. See “Replacing the system board shield” on page 20. 4. Replace the Wi-Fi card. Figure 59. Removing the Wi-Fi card shield Figure 60. Disconnecting the Wi-Fi antenna cables Figure 61. Removing the Wi-Fi card Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 41: Replacing The Heat Sink

    Figure 62. Installing the Wi-Fi card Figure 63. Connecting the Wi-Fi antenna cables Figure 64. Installing the Wi-Fi card shield 5. Reinstall the removed parts. To complete the replacement, see “Completing the parts replacement” on page 47. Replacing the heat sink Attention: Do not open your computer or attempt any repairs before reading the Important Product Information Guide.
  • Page 42 • Do not touch the thermal grease while handling the heat sink. Figure 65. Removing the heat sink Figure 66. Installing the heat sink 5. Reinstall the removed parts. To complete the replacement, see “Completing the parts replacement” on page 47. Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 43: Replacing The Microprocessor

    Replacing the microprocessor Attention: Do not open your computer or attempt any repairs before reading the Important Product Information Guide. CAUTION: The heat sink might be very hot. Before you open the computer cover, turn off the computer and wait several minutes until the computer is cool.
  • Page 44 Figure 68. Opening the retainer Figure 69. Removing the microprocessor Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 45 Figure 70. Installing the microprocessor Chapter 4 Replacing hardware...
  • Page 46 8. Route all the cables that you disconnected from the system board, and then reconnect the cables to the system board. 9. Reinstall the removed parts. To complete the replacement, see “Completing the parts replacement” on page 47. Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 47: Replacing The Internal Camera

    Replacing the internal camera Attention: Do not open your computer or attempt any repairs before reading the Important Product Information Guide. 1. Remove the computer stand. See “Replacing the computer stand” on page 14. 2. Remove the computer cover. See “Removing the computer cover” on page 16. 3.
  • Page 48: Replacing The System Board

    3. Remove the system board shield. See “Replacing the system board shield” on page 20. 4. Remove the M.2 solid-state drive. See “Replacing the M.2 solid-state drive” on page 29. 5. Remove all memory modules. See “Replacing a memory module” on page 34. Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 49: Replacing The Lcd Panel

    6. Remove the Wi-Fi card. See “Replacing the Wi-Fi card” on page 36. 7. Remove the heat sink. See “Replacing the heat sink” on page 37. 8. Remove the microprocessor. See “Replacing the microprocessor” on page 39. 9. Record the cable routing and cable connections, and then disconnect all cables from the system board. See “System board”...
  • Page 50 Note: Ensure that you remove and reinstall the screws in order of the numbers as shown. Figure 77. Removing the LCD panel and the chassis from the frame Figure 78. Removing the LCD panel from the chassis Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 51: Completing The Parts Replacement

    Figure 79. Installing the LCD panel into the chassis Figure 80. Installing the LCD panel and the chassis into the frame 18. Route the new LCD panel cables, and then connect the cables to the system board. 19. Reinstall the removed parts. To complete the replacement, see “Completing the parts replacement” on page 47.
  • Page 52 5. Place the computer in an upright position. 6. If a locking device is available, use it to lock the computer. 7. Reconnect the external cables and power cords to the corresponding connectors on the computer. Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 53: Appendix A. Notices

    Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.
  • Page 54 Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...
  • Page 55: Appendix B. Trademarks

    Appendix B. Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo The Lenovo logo The terms HDMI and HDMI High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
  • Page 56 Lenovo V330-20ICB AIO User Guide and Hardware Maintenance Manual...

Table of Contents