Advertisement
Service
Maintenance
Maintenance
An exploded view of the 16334A (for parts identification) is shown in Figure 2-1. Do not
disassemble any further than shown. Maintenance consists principally of cleaning contacts
and replacing worn or damaged parts. Take special care when cleaning contacts. To order
parts, use the Agilent Technologies part numbers listed in Table 2-12-1. If a faulty part is
located in an assembly that cannot be disassembled, order the next higher assembly or
return the whole device to the nearest Agilent Technologies Sales/Service Office for repair
or replacement.
18
Chapter 2
Advertisement
