Maintenance - Agilent Technologies 16048A Operation And Service Manual

Service

Maintenance

Maintenance
An exploded view of the 16048E (for parts identification) is shown in Figure 2-1
and Figure 2-2. Do not disassemble any further than shown. Maintenance consists
principally of cleaning contacts and replacing worn or damaged parts. Take special
care when cleaning contacts. To order parts, use the Agilent Technologies part
numbers listed in Table 2-1 and Table 2-2. If a faulty part is located in an assembly
that cannot be disassembled, order the next higher assembly or return the whole
device to the nearest Agilent Technologies Sales/Service Office for repair or
replacement.
Figure 2-1 Parts Identification 1/2
16 Chapter 2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com