Advertisement
Service
Maintenance
Maintenance
An exploded view of the 16048D (for parts identification) is shown in Figure 2-1.
Do not disassemble any further than shown. Maintenance consists principally of
cleaning contacts and replacing worn or damaged parts. Take special care when
cleaning contacts. To order parts, use the Agilent Technologies part numbers listed
in Table 2-1. If a faulty part is located in an assembly that cannot be disassembled,
order the next higher assembly or return the whole device to the nearest Agilent
Technologies Sales/Service Office for repair or replacement.
16
Chapter 2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
