Advertisement
FRONT STABILIZER (B) ASSEMBLY
Step 1. Remove the four preassembled screws (B3), spring washer (B4)
and washer (B5) from the front stabilizer (B).
Step 2. Attach the front stabilizer (B) on to main frame (A) with screws (B3),
spring washer (B4) and washer (B5).
USE TOOL:6m/m
Step 1. Remove the three preassembled screws (D2) from the console supporting tube (D).
Step 2. Connect console wire (K1&K2).
Step 3. Attach the console supporting tube (D) on to main frame (A) with screw (D2-left)
and screw (D2-right).
Step 4. Use two hands to hold small handle bar to lift up the main frame (A). then finish the
screw (D2-middle) assembly.
Step 5. Remove the bottom polyfoam pieces #5 & #6.
(D2-left)
(Hold here)
(D2-middle)
( Main frame lift up then screw it)
CONSOLE SUPPORTING TUBE (D) ASSEMBLY
A
D
(D2-right)
K2
K1
B3
A
POLYFOAM(5&6)
4
B
B4
B5
USE TOOL:6m/m
Advertisement
