Cisco ASR 1002-X Overview And Installation page 41

Cisco ASR 1002-X Router Overview and Installation
SUMMARY STEPS
1. Connect one end of the RJ-45 cable to the serial RJ-45 port (CON) on the front panel (see the following
image).
2. Run the cable up and through the cable management bracket and connect the other end of the RJ-45 cable
to the RJ-45 adapter (see
Processor, on page
3. Connect the adapter to your video terminal to complete the cable connection.
4. Power on your video terminal.
5. Configure your video terminal to match the following default console port settings:
6. Continue with the installation by referring to the procedure described in the
to the Cisco ASR 1002-X Router, on page
DETAILED STEPS
Step 1
Connect one end of the RJ-45 cable to the serial RJ-45 port (CON) on the front panel (see the following image).
Figure 33: Cisco ASR 1002-X Router Console Port Connection on the Route Processor
1 CON port connection
Step 2 Run the cable up and through the cable management bracket and connect the other end of the RJ-45 cable to the RJ-45
adapter (see Figure 33: Cisco ASR 1002-X Router Console Port Connection on the Route Processor, on page
Step 3 Connect the adapter to your video terminal to complete the cable connection.
Step 4
Power on your video terminal.
Step 5 Configure your video terminal to match the following default console port settings:
• 9600 baud
• 8 data bits
• No parity generation or checking
• 1 stop bit
• No flow control
Figure 33: Cisco ASR 1002-X Router Console Port Connection on the Route
41).
2 AUX port connection
Connecting a Terminal to the Console Port
42.
Cisco ASR 1002-X Router Overview and Installation
Connecting External Cables
41).
41