Cisco ASR 1002-X Overview And Installation page 22

Two-Post Rack Installation
Caution
If you are using a two-post rack, secure the rack to the floor surface to prevent tipping and avoid bodily injury
and component damage.
Perform the following procedure to install a two-post rack:
SUMMARY STEPS
1. Position the chassis such that the front is closest to you and lift it carefully into the rack.
2. Slide the chassis into the rack, pushing it back until the brackets meet the mounting strips or posts on both
sides of the rack.
3. Keeping the brackets flush against the posts or mounting strips, align the holes in the brackets with the
holes on the rack or mounting strips.
4. For each bracket, insert and tighten two screws to the rack on both sides.
DETAILED STEPS
Step 1 Position the chassis such that the front is closest to you and lift it carefully into the rack.
Caution To prevent injury, avoid any sudden twists or moves.
The following image shows where to attach the rack mount brackets to the Cisco ASR 1002-X Router.
Figure 13: Attaching the Rack Mount Brackets to the Cisco ASR 1002-X Router
1 Rack equipment rail
Step 2 Slide the chassis into the rack, pushing it back until the brackets meet the mounting strips or posts on both sides of the
rack.
Step 3 Keeping the brackets flush against the posts or mounting strips, align the holes in the brackets with the holes on the rack
or mounting strips.
Cisco ASR 1002-X Router Overview and Installation
22
2 Rack mount bracket ear and holes
Cisco ASR 1002-X Router Overview and Installation