Ethernet Connection - Omron F250 Vision Sensor Setup Manual

Ethernet Connection

Connection Examples
1:1 Connection
Use a Shielded (STP) 10 Base-T Crossover Cable to make the 1:1 connection.
The cable length must be less than 30 m.
Controller
1:N Connection
A Hub can be used to communicate with two or more Controllers from a single computer.
Use Shielded (STP) 10 Base-T Straight-through Cables to make the 1:N connections.
The cable length between the Controllers and the Hub must be less than 30 m.
10 Base-T Straight-through
Cable (STP)
(Less than 30 m)
Controller
10 Base-T Crossover Cable (STP)
(Less than 30 m)
PC
10 Base-T Straight-through Cable (STP)
HUB
10 Base-T Straight-through
Cable (STP)
(Less than 30 m)
Controller
SECTION 4
Connecting External Devices
PC
10 Base-T Straight-through
Cable (STP)
(Less than 30 m)
Controller
F250
47
Setup Manual