Component Names And Functions - Omron F250 Vision Sensor Setup Manual

SECTION 2
Installation and Connections

Component Names and Functions

Pin
1 RS-232C/RS-422 Connector
2 Ethernet Connector (10BASE-T)
3 Monitor Connector
(S-VIDEO Output)
4 Monitor Connector
(Composite Video Output)
5 Memory Card Slots 0 and 1
6 Memory Card Indicators 0 and 1
7 Console Connector
8 ERROR Indicator
9 RUN Indicator
10 POWER Indicator
11 Parallel Connectors 0 and 1
12 Camera Connectors 0 to 3
13 Ground Terminal
14 Power Supply Terminals
F250
22
Setup Manual
Name
Connects the Controller to an external device such as a personal
computer or PLC.
Connects the Controller to a personal computer.
Connects to a monitor with an S-VIDEO input.
Connects to a monitor.
Memory Cards such as the Application Software Memory Card can be
inserted in these slots.
Lit when power is being supplied to the corresponding Memory Card.
(The Memory Card must not be inserted or removed when this indicator
is lit.)
Connects the Controller to a Console.
Lit when an error has occurred.
Lit while the Controller is in Run Mode.
Lit while power is ON.
Connect the Controller to external devices such as a sync sensor or
PLC.
Connect to the Cameras.
Connects to the ground wire.
Connect to the DC power supply.
Function