Cisco ASR 914 Manual page 62

Hide thumbs Also See for ASR 914:

Table of Contents

Set up 3G Patch Panel on Rack

Figure 40: Installing the Patch Panel - Dual in a 23-inch Rack

Step 5

Secure the brackets to the chassis with the screws. The recommended maximum torque is 28 in.-lb (3.16

N-m).

• EIA 19 and 23 inches mounting brackets for both single and double 3G interface module patch panels.

• ETSI 21 inches mounting brackets for both single and double 3G interface module patch panels.

Set up 3G Patch Panel on Rack

To install the optional cable management brackets, perform these steps:

Procedure

Step 1

Position the cable management brackets against the front of the chassis and align the screw holes, as shown

in the figure.

Step 2

Secure the cable management brackets with the screws. The recommended maximum torque is 10 in.-lb (1.12

N-m).

Installing the Cisco ASR 914 Router

Table of Contents