Cisco ASR 914 Manual page 37

Installing the Cisco ASR 914 Router
Step 5
When the InstallShield Wizard Completed window appears click Finish.
Connecting to the Auxiliary Port
When a modem is connected to the auxiliary port, a remote user can dial in to the router and configure it. Use
a light blue console cable and the DB-9-to-DB-25 connector adapter.
Note
The console cable and DB-9-to-DB-25 connector are not included with the Cisco ASR 914 Router; they are
ordered separately.
Procedure
Step 1
Connect the RJ45 end of the adapter cable to the black AUX port on the router, as shown in the figure below.
Figure 18: Connecting a Modem to the Cisco ASR 914 Router
1 RJ45 AUX port 3 RJ45 to DB-9
Connecting to the Auxiliary Port
Installing the Cisco ASR 914 Router
37