Quick Reference Table - Supermicro X11SCW-F User Manual

Super X11SCW-F User's Manual

Quick Reference Table

Jumper Description
JBT1 CMOS Clear
JPG1 VGA Enable
JPL1, JPL2 LAN1, LAN2 Enable
JPME2 ME Manufacturing Mode
JWD1 Watchdog Timer
LED Description
LE1 Unit Identifier (UID) LED
LE6 Power Ready LED
LEDEC1 Embedded Controller (EC) Heartbeat LED
LEDEC2 EC Thermal Event LED
LEDM1 BMC Heartbeat LED
LEDPWR Onboard Power LED
Connector Description
BT1 Onboard Battery
COM1, COM2 COM Port, COM Header
FAN1 ~ FAN6 CPU/System Fan Headers
IPMI_LAN Dedicated IPMI LAN Port
Intel® PCH SATA 3.0 Ports (with RAID 0, 1, 5, 10)
I-SATA2 ~ I-SATA7
I-SATA2 and I-SATA3 supports SuperDOM
I-SGPIO1, I-SGPIO2 Serial Link General Purpose I/O Headers
Power LED Indicator/Speaker Header
JD1
(Pins 1-3: Power LED; Pins 4-7: Speaker)
JF1 Front Control Panel Header
JIPMB1 4-pin BMC External I
JL1 Chassis Intrusion Header
JPI C1 Power I
2
JPWR1 24-pin ATX Power Supply Connector
JPWR2 8-pin Power Connector
JSD1, JSD2 SATA DOM Power Connectors
JSTBY1 Standby Power Header
JTPM1 Trusted Platform Module (TPM)/Port 80 Header
LAN1, LAN2 1GbE LAN Ports
Notes: The table above is continued on the next page.
C Header (for an IPMI card)
2
C System Management Bus (SMB) Header
2
12
Default Setting
Open (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Reset)
Status
Solid Blue: Unit Identified
Solid Amber: Standby
Solid Red: Power Failed
Solid Green: Power On
Blinking Green: EC Normal
Solid Red: CPU/DIMM Overheat
Blinking Green: BMC Normal
Solid Green: Power On