Supermicro X11SCW-F User Manual page 40

Super X11SCW-F User's Manual
NIC1/NIC2 (LAN1/LAN2)
The Network Interface Controller (NIC) LED connection for LAN port 1 is located on pins
11 and 12 of JF1, and LAN port 2 is on pins 9 and 10. Attach the NIC LED cables here to
display network activity. Refer to the table below for pin definitions.
HDD LED/UID Switch
The HDD LED/UID Switch connection is located on pins 13 and 14 of JF1. Attach a cable
to pin 14 to show hard drive activity status. Attach a cable to pin 13 to use the UID switch.
Refer to the table below for pin definitions.
PWR
Power Button
Reset
Reset Button
3.3V
UID LED
3.3V Stby
3.3V Stby
UID SW
3.3V
NMI
LAN1/LAN2 LED
Pin Definitions (JF1)
Pins Definition
9 VCC
10 NIC2 Link/Active LED
11 VCC
12 NIC1 Link/Active LED
HDD LED/UID Switch
Pin Definitions (JF1)
Pin# Definition
13 3.3V Stdby/UID SW
14 HDD Active
1 2
Ground
Ground
Power Fail LED
OH/Fan Fail LED
NIC2 Active LED
NIC1 Active LED
3
HDD LED
PWR LED
Ground
19 20
40
1. NIC2 LED
2. NIC1 LED
3. HDD LED/UID Switch
1
2