Supermicro X11SCW-F User Manual page 88

Super X11SCW-F User's Manual
*iSCSI is only supported on Onboard LAN1. The default setting for Onboard LAN1 is
PXE.
Network Stack
Select Enabled to enable Preboot Execution Environment (PXE) or Unified Extensible Firm-
ware Interface (UEFI) for network stack support. The options are Disabled and Enabled.
*If the feature above is set to Enabled, the following settings will become available for
configuration:
Ipv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. The options are Disabled and Enabled.
Ipv4 HTTP Support
Select Enabled to enable IPv4 HTTP boot support. The options are Disabled and Enabled.
Ipv6 PXE Support
Select Enabled to enable IPv6 PXE boot support. The options are Disabled and Enabled.
Ipv6 HTTP Support
Select Enabled to enable IPv6 HTTP boot support. The options are Disabled and Enabled.
IPSEC Certificate
Internet Protocol Security (IPSEC) offers a secure connection for remote computers using a
secure tunnel. The options are Disabled and Enabled.
PXE Boot Wait Time
Use this feature to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on your keyboard to change the value. The default setting is 0
Media Detect Count
Use this feature to specify the number of times media will be checked. Press "+" or "-" on
your keyboard to change the value. The default setting is 1.
Trusted Computing

The X11SCW-F supports TPM 1.2 and 2.0. The following Trusted Platform Module (TPM)
information will display if a TPM 2.0 module is detected:
•
Firmware Version
•
Vendor Name
88
.