Esc+Pr Release Proportional Pitch - SATO WS4 Series Programming Reference Manual

Modification
Available for
WS4 series

ESC+PR Release Proportional Pitch

Release Proportional Pitch
ESC
Hex code
<1B>
16
Default setting None
When printer is powered off
Persistence of the
Validity in a job
command
Validity after a job
[Function]
Releases proportional pitch
[Format]
<PR>
[Coding example]
<A>
<PR>
<V>100<H>200<P>2<L>0202<XM>ABCD
<Q>2
<Z>
[Notes]
1. The default setting is set to [Proportional pitch].
[Valid commands]
WS4 series
Font
<XU>
Modification
PR Parameter
<50> <52> None
16 16
Command settings will not be retained
Command set are valid until setting is changed
Will be retained after the job
<XS> <XM> <XB>
ESC+PR
<XL> <$=>
<RD>
20