F4] : Ccd Data Input - FujiFilm FinePix S5200 Series Service Manual

4. Adjustments

4-10. [F4] : CCD Data Input

CCD data input is required when the LENS ASSY or MAIN
PWB ASSY is replaced.
[Method of acquiring CCD data]
1. When you exchange LENS ASSY
--> It is attached to LENS ASSY.
2. When you exchange MAIN PWB ASSY
--> Creating a CCD data floppy disk when the MAIN PWB
ASSY has been replaced.
* The following example assumes the use of the serial
No. shown at right.
<Step 1>
Read the serial number of LENS ASSY.
The numbers shown at right are as follows.
First line: 501W (four digits)
Bottom line: 0149 (four digits)
The name of the CCD data file containing this number is
"501W0149.dat".
Cautions:
1. The CCD defect data file extension is "dat".
Depending upon Windows settings, this extension may
not be displayed. In this case, change the settings to
ensure that it is displayed.
2. In addition to numbers, letters are also used in the CCD
serial No. The data file name is instructed in the same
manner in this case.
3. Ensure that the CCD serial No. is read correctly. If the file
name is read incorrectly CCD data for another camera
will be loaded when this file is used.
<Step 2>
Download the ZIP file of top four digits from Web server
(http://fujifilm-di.intranets.com/).
Open [ZJ00936-100] in the CCD defect data folder, and
download "501W.zip".
<Step 3>
Decompress "501W.zip".
--> "501W folders" including "501W0149.dat" is made.
<Step 4>
Insert a writable floppy disk into the floppy disk drive on the
computer.
<Step 5>
Open in "501W folders", search for "501W0149.dat", and
copy it onto the floppy disk.
Caution: Do not create a folder on the floppy disk when
copying the data.
74
FinePix S5200/S5600 Service Manual
501W
0149
501W0149
<Fig. 4-10-1>
(http://fujifilm-di.intranets.com/)
(2)
CCD Defect Data ZJ00936-100
(1)
< Defect data making procedure chart >
501W
0149
(3)
Data after demompression
501V.zip
501W0004
501W0009
501W0013
501W.zip
501W0128
501W0136
501W0140
501X.zip
501W0149