L] : Lens Data Input - FujiFilm FinePix S5200 Series Service Manual

4. Adjustments
4-9.

[L] : LENS Data Input

If the LENS CONST or MAIN PWB ASSY was replaced,
enter the LENS data. As LENS data, simply enter the number
on the lens bar code label.
Note: When replacing the MAIN PWB ASSY, always make
a note of the LENS bar code label number printed
on the LENS CONST.
< Adjustment >
<Step 1>
Select [L] LENS Data Input on the [Adjustment Items Select] screen.
--> The [LENS Data Input Start] screen appears.
<Step 2>
Run the adjustment in accordance with the instructions on the screen.
09320000160
LENS Data Input
< Preparations >
(1) Enter the 11-digit Lens serial number in the
LENS Data Input dialog box.
When preparation is complete, press the [Enter] key on the PC.
( Or, click on the OK button.)
--> Write the adjustment data to the flash ROM when adjustment has been completed correctly.
--> The [LENS Data Input Complete] screen appears.
72
FinePix S5200/S5600 Service Manual
09320000160
<Fig. 4-9-1>
<Fig. 4-9-2>