Disassembling The Const Rear - FujiFilm FinePix S5200 Series Service Manual

FinePix S5200/S5600 Service Manual
2-3.

Disassembling the CONST REAR

(1) Remove the 5 screws (M1.7 x 4.0).
(2) Remove the FRAME LCD.
(3) Unlock connector CN802 and then remove the KSW-
MSW FFC.
(4) Remove the screw (M1.7 x 4.0).
(5) Push the MSW PWB lock catch in the direction of the
arrow to disengage it.
(6) Remove the MSW PWB in the direction of the arrow.
(7) Remove the 2 screws (M1.7 x 4.0).
(8) Remove the KSW PWB in the direction of the arrow.
(9) Remove the LCD CONST in the direction of the arrow.
(10) Remove the BUTTON REAR in the direction of the
arrow.
(11) Remove the BUTTON ZOOM in the direction of the
arrow.
(12) Remove the screw (M1.7 x 4.0).
(13) Remove the STRAP RIGHT in the direction of the
arrow.
(14) Remove the ASSY CURSOL in the direction of the
arrow.
[Assembly]
Re-assemble by reversing the disassembly procedure.
[Notes on assembly]
When fitting the MSW PWB into the CASE R, set the DIAL
MODE to "AUTO" and set the selector dial on the MSW
PWB to the position shown in the figure before assembly.
2. Disassembly
7
4
5
6
8
3
12
11
13
10
14
1
2
9
17