Replacing The Control Board - Traulsen RBC100 Service Manual

5 TRAULSEN RBC50, RBC100 & RBC200 BLAST CHILLER BASIC SERVICE GUIDE

Replacing The Control Board

DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND
1. Remove thumb screws & control cover (see fig. 1).
2. Remove Five (5) #2 Phillips head screws (see fig. 2).
3. Disconnect ten (10) electrical connections (see fig. 3).
4. Re-assemble in reverse order.
5. Restore power.
6. If previously authorized by Traulsen, insert original control in pre addressed mailer
and return to Traulsen.
FOLLOW PROPER LOCKOUT/TAGOUT PROCEDURES.
Fig. 1
Fig. 2
WARNING
Fig. 3