Water Filter Maintenance - Wega MyConcept EVDP 2GR Use And Maintenance Manual

Water filter maintenance

10.4
10.4.1 Water hardness detection
As part of the filter maintenance, it is advisable to test
the water beforehand.
To identify the carbonate hardness of the water use
the kit specified as follows:
1. Put 10 ml of water to be tested in the test tube (1);
2. add a drop of reagent (2) and mix;
3. proceed in the same way by counting the number
of drops until the solution (3) changes color from
Blue to Red
1 DROP = 1°dKH
Example: 9 Drops ----> Carbonate hardness 9°dKH
3
TECHNICIANS manual
10.4.2 By-pass configuration
by-pass of the water filter as shown in the table below.
Example:
2
1
The values indicated in the table may vary, depending on the filter
cartridge type used.
To adjust the by-pass, push the button (4) and turn.
Depending on the hardness of the water, adjust the
Water hardness 9°dKH
By-pass 2 adjustment
Water Ad-
hardness justm.
V
(°dKH) Bypass
4 3 6,250
5 3 5,000
6 3 4,165
7 3 3,570
8 2 3,125
9 2 2,775
10 2 2,500
12 1 1,865
14 1 1,600
16 0 1,185
20 0 945
24 0 790
≥ 25 0 ≤ 755
Filter capacity (liters)
M L XL
9,500 13,000 17,000
7,600 10,400 13,600
6,330 8,665 11,330
5,425 7,425 9,710
4,750 6,500 8,500
4,220 5,775 7,555
3,800 5,200 6,800
2,835 3,885 5,080
2,430 3,330 4,355
1,800 2,465 3,220
1,440 1,970 2,575
1,200 1,640 2,145
≤ 1,150 ≤ 1,575 ≤ 2,060
4
51 76
of