Trane IntelliPak SCWG 020, SCWG 025, SCWG 030, SCWG 035, SWG 020, SWG 025, SWG 030, SWG 035, SCRG 020, SCRG 025, SCRG 032, SRG 020, SC Installation Manual page 13

Rigging and Handling
Unit Shipping
1. Position rigging sling under wood
shipping skid.
2. Use spreader bars to avoid unit
damage.
3. When using a forklift, exercise caution
to prevent unit damage.
4. Use the standard fork length to lift one
end and drag or pull unit while skidding
the opposite end.
5. The unit center of gravity will fall within
center of gravity block at various
locations depending on unit options.
6. Use hooks to lift fan section only. Do not
hook into open channels to lift unit.
7. See unit nameplate for unit weight.
8. Do not stack units.
CAUTION
!
Do not use hooks to lift unit or
hook into open channels to lift
unit. This could cause unit
damage.
Figure I-PC-8. Split-apart modular unit proper rigging.
SCXG-SVX01B-EN
Installation
Figure I-PC-7. Assembled modular unit proper rigging.
Pre-Installation
Considerations
Fan Section
13