TP-Link TD-W8960N User Manual page 27

4.4.2.1 ATM-EoA-PPPoE
If your ISP provides a PPPoE connection and you need to use an ATM Interface, follow the steps
below to add a WAN service over a selected ATM interface:
1. Add a new ATM interface and select EoA option for DSL Link Type
2. Click the Add button on the screen Figure 4-8 and select WAN Service Interface over ATM
PVC on the next screen.
3. Select the WAN Service type on the screen as follows. You can enter the service
Description to be service name in the text box or leave the default name.
4. If your ISP provides a PPPoE connection, select PPPoE option. And you should enter the
following parameters.
TD-W8960N Wireless N ADSL2+ Modem Router User Guide
Figure 4-9
Figure 4-10
20
(4.4.1.1 ATM interfaces).