Resetting The Factory Default Settings - Miele G 8066 Operating Instructions Manual

Programming special functions
6. Resetting the factory default
settings
All settings can be reset to the factory
default settings in Programming level 7.
To do this you must first select the
factory setting and then confirm them.
After confirming the factory settings, all
adjustments are reset. Any changes
must be reentered if required.
Accessing programming level 7
^ Turn the machine off by pressing Z.
^ Press and hold the A and 6
buttons, at the same time turn the
machine on with the main switch Y.
The display shows the current
program status P....
The p indicator lights.
^ Press the y button 7 times. The
display shows 7 (programming
level 7).
6.1 Activating the factory setting
^ Press z until 7.01 is displayed.
^ Press A. The display shows the
current setting:
00 factory setting, or
PP customized settings.
^ Press A until the setting 00 (factory
setting) is displayed.
The factory settings are now selected.
If you have selected 00 by mistake
^ Press A to toggle between 00 and
pp.
44
6.2 To save your changes
^ Press 6. The display shows SP.
^ Press the 6 button again. Values
which had been changed are now
reset.
^ Turn the machine off with the
Z button.
All values which can be changed, are
now reset to the factory setting.
If the water hardness setting had
been changed this will reset to the
factory setting of 19 gr/gal (340 ppm
CaCO3). Please readjust to the
hardness level in your area.
If PP was selected and confirmed, the
customized settings were not reset.