GRAUPNER GM Genius Pro Series Manual page 20

Max-reverse (maximum reverse speed)
You set the maximum reader speed here: 20% ~ 100%.
The maximum reverse speed determines the maximum power that
is available when driving in reverse and permits reduction of the
acceleration and speed when driving in reverse in mode Two Way 1,
2 or 3.
Neutral W. (neutral point width)
You set the width of the neutral point here: narrow, normal, wide
The neutral point width is the region around the neutral position of
the transmitter joystick and, depending on the mechanical play of
the transmitter joystick, can be adjusted.
Direction (motor's direction of rotation)
You set the motor's direction of rotation here. Normal / Reverse
Brake Response
Adjust the break strength. The higher the percent, the stronger the
brake.
A.B.S. Brake
Here you can set the ABS braking effect.
Off/ Weakest/ Weak/ Normal/ Strong/ Strongest. You set ABS brak-
ing OFF here or the strength that you need at the full braking posi-
tion.
Drag Brake
Using the INC & DEC buttons, set the automatic braking effect 0 ~
100%.
Set the automatic braking effect for the neutral position.
Practical values: 0~30% (crawler: 40~100%).
Min-Brake (minimum braking effect)
Using the INC & DEC buttons, you set the automatic brake here: 0 ~
100%.
Set the minimum braking effect. (Practical values: 0 ~ 40%)
(Braking range: minimum braking effect ~ maximum braking effect).
Mid Brake Amount
Set the middle percentage of the break range.
Mid Brake Location
Set the position of the middle brake range.
This function is deactivated when mid brake amount and mid brake
location are set at 0%.
20 / 32
S3084_S3086_S3078_S3085_MP_V1