GRAUPNER GM Genius Pro Series Manual page 14

Special characteristics
14 / 32
Advanced timing
If the Advanced timing value is decreased, the power consumption
and the temperature of the motor are also reduced. The maximum
speed and acceleration are also reduced, thus increasing the battery
life.
If the Advanced timing value is increased, the power consumption
and the temperature of the motor are also increased. The maximum
speed and acceleration are also increased, thus reducing the battery
life. To increase the maximum speed, we recommend the act on the
gear ratio. If the value is set to 0, the controller is in the 0-boost
mode and thus compliant with the 0-boost rules. This is signaled by
flashing of the green LED in the neutral position.
Acceleration
Influences the run-up behavior of the motor. A lower value corre-
sponds to softer start-up of the motor; a higher value means some-
what more power.
Start power
When used as launch control, this can greatly simplify starts.
Power curve
Affects primarily the response. A lower value makes the throttle
softer and more controllable; a higher value makes the response
more aggressive.
Reverse function
TwoWay: Reverse gear with adjustable delay (off – 2.5 s)
TwoWay2: Reverse gear with a fixed delay of 1 second
TwoWay 3: The reverse is only possible if the throttle lever is brought
from the forward travel into the braking position and then reset to
neutral. By pushing the throttle lever into the brake position, then it
is only possible to reverse.
Telemetry function
Values such as the temperature of the components, speed and cur-
rent, as well as the error log can be read via the programming box
following operation.
Note
If a sensor problem occurs during operation, the controller switches
automatically to the sensorless function!
S3084_S3086_S3078_S3085_MP_V1