Equalizer; Adjustment Instructions; Switching The Equalizer On And Off - Blaupunkt Pasadena CD71 Operating And Installation Instructions

Radio / cd
Table of Contents

Advertisement

TIME
Adjust the minutes with the
ton, 7.
Press the OK button, 5 or the MENU
button, 8, to leave the menu. The set-
tings are then saved.
Selecting 12/24-hour clock mode
Press the MENU button, 8.
Press the
or
as is necessary for "24 H MODE" or "12
H MODE" to appear in the display.
Press the
or
between the modes.
Press the OK button, 5 or the MENU
button, 8, to leave the menu. The set-
tings are then saved.
Having the time displayed
constantly when the device is
switched off
If you want the time to be displayed
when the device is switched of and the
ignition is switched on, press the MENU
button 8.
Press the
or
as is necessary for "CLK OFF" or "CLK
ON" to appear in the display.
Press the
or
between the display being ON or OFF.
Press the OK button, 5 or the MENU
button, 8, to leave the menu. The set-
tings are then saved.
56
/
but-
button, 7, as often
buttons, 7, to switch
button, 7, as often
button, 7, to switch

Equalizer

This device has a parametric digital equaliz-
er. In this case, parametric means that in each
of the three filters, one individual frequency
can be emphasised or reduced (with a gain
of +8 to -8).
The following filters are available:
LOW EQ
MID EQ
HIGH EQ
These filters can be set without using any
measuring instruments. It allows the sound
properties in the vehicle to be significantly
affected.

Adjustment instructions

We recommend using a familiar CD to per-
form this adjustment.
Before making any adjustments to the equal-
izer zero the tone settings and deactivate the
loudness. For more information, read the sec-
tion on "Tone and volume".
Listen to a CD, tape cassette or Mi-
niDisc (according to how the radio is
equipped).
Compare the sound you hear with how
you feel it should be.
Now consult the "Equalizer adjustment
guide" table for "Tone impression".
Adjust the equalizer values as de-
scribed under "Action".
Switching the equalizer on and
off
To switch off the equalizer, press the
DEQ button, 6.
"LOW EQ" is shown on the display.
To switch off the equalizer, hold down
the DEQ button, 6 until "DEQ OFF"
briefly appears.
EQUALIZER
32 - 200 Hz
250- 1,600 Hz
2,000 - 12,500 Hz

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents