Table of Contents
Advertisement
Equalizer
This car audio system is equipped with
a parametric digital equalizer. In this
case, parametric means that it is possi-
ble to individually raise or lower one fre-
quency (GAIN +10 to -20 dB) for each
of the five filters.
The following filters are available:
SUB LOW EQ
LOW EQ
MID EQ
MID/HIGH EQ
HIGH EQ
These filters can be adjusted without the
use of measuring equipment. As a re-
sult, it is possible to significantly influ-
ence the in-vehicle acoustics.
Notes on making equalizer
settings
We recommend that you use a cassette
or CD (if a CD changer is connected)
you are familiar with to make the set-
tings.
Before you set the equaliser, set bass,
treble, balance and fader to "0" and de-
activate the Loudness function. For
more information on how to do this, re-
fer to the section on "Tone and balance/
fader".
Now listen to the cassette or CD
you have selected.
Evaluate the sound according to
your own personal preferences.
Now refer to "Sound impression" in
the following table.
32 to 50 Hz
63 to 250 Hz
315 to 1250 Hz
1600 to 6300 Hz
8000 to 12500 Hz
Make the settings for the equalizer
as described under "What to do".
Switching the equalizer on/off
To switch the equalizer on, press
and hold down DEQ < until EQ
lights up in the display and "EQ
ON" appears briefly.
To switch the equalizer off, press
and hold down DEQ < until EQ
no longer lights up in the display
and "EQ OFF" appears briefly.
Adjusting the equalizer
Press DEQ <.
Press
or
"DIGITAL EQ".
: to select the filter.
Press
or
Press
or
To select the frequency, press
:.
To adjust the level, press
:.
To select the next filter, first press
OK ; and then
Once you have completed making
all of the necessary adjustments,
press DEQ <.
EQUALIZER
: to select
:.
or
:.
or
51
Advertisement
Table of Contents
