Removing The Cd; Selecting A Track; Fast Searching (Audible); Random Track Replay (Mix) - Blaupunkt Pasadena CD71 Operating And Installation Instructions

Removing the CD

button, 1.
Press the
The control unit opens to the front.
Press the button on the opened con-
trol unit.
The CD is ejected.
Carefully remove the CD.
Note:
If you do not remove the CD within 30 sec-
onds it will be drawn back into the drive.

Selecting a track

Press one of the buttons in the arrow
button group, 7, as often as needed
for the number of the desired track to
appear in the display.
button, 7, is pressed once the
If the or
current track will be started again.

Fast searching (audible)

In order to search rapidly backwards or for-
wards
hold down one of the
tons, 7, until the fast search back-
wards of forwards starts.

Random Track Replay (MIX)

Press the softkey, 4, indicating "MIX".
"MIX CD" appears briefly on the display. The
next track to be played will be selected at ran-
dom.
Ending MIX
Press the softkey, 4, indicating "MIX"
again.
"MIX OFF" appears briefly on the display.

Scanning tracks (SCAN)

You can hear a brief sample from all the tracks
on the CD.
"SCAN" appears in the display. The tracks on
the CD are played in ascending order.
Note:
The duration of the samples can be adjusted.
For information on setting the sampling dura-
tion, read the paragraphs on "Adjusting the
Sample Duration" in the "Radio Operation"
section.
Stopping the SCAN to continue listening
to a track
The track that is currently being sampled will
continue to be played.

Repeating tracks (REPEAT)

The title will be repeated until RPT is deactiv-
ated.
, or but-
Stopping REPEAT
Play continues as normal.

Changing the display contents

You can choose between different display
modes during CD operation:
CD OPERATION
Press the softkey, 4, indicating "SCA".
Press the softkey, 4, indicating "SCA"
again.
Press the softkey, 4, indicating "RPT".
Press the softkey, 4, indicating "RPT"
again.
Display of track number and time.
Display of track number and play time.
Display of CD name and track number.
In order to change between the display
modes, press the DIS button, :, as of-
ten as you need for the desired informa-
tion to be shown on the display.
49