Step 4: Remove And Store The Retainers - Roland VersaUV LEC2-300 Setup Manual

Step 4: Remove and Store the Retainers
IMPORTANT
• Make sure to remove all the retainers. Any that remain may cause faulty operation or breakdown when the
power is switched on.
• Store the retainers because they are needed again when transporting the machine.
Procedure
A
Remove all the retainers indicated by A, B, and C.
A
B
Install the retainer indicated by B at the position indicated in the figure for storage.
Bolt removed in step B
A
B
2. Assembly and Ink Filling
B/C
C
33
2.Installation