3. Assembling and Installing
Step 5 : Remove the Packing Materials
Tape and other packing materials are attached to the machine to protect it from vibration during transporta-
tion. When the installation is complete, remove these materials.
WARNING
Remove all packing materials. Any that remain may cause faulty operation or breakdown when the power
is switched on.
Store the packing materials carefully, because they are needed again when transporting the machine for
relocation or the like.
Procedure
Remove all the packing materials of
Attach the removed packing material of
30
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
.
at the location shown in the figure for storage.
Bolt removed in step
.