Temperature And Humidity; Installation Space; Air Ventilation - Roland VersaUV LEC2-300 Setup Manual

Temperature and Humidity

Maintain the specified temperature and humidity even when the machine is not in use. Failure to do so may result
in malfunction.
• During operation: Temperature: 15 to 32°C (59 to 90°F), humidity: 20 to 80%RH (no
condensation)
• During non-operation: Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80%RH (no
condensation)

Installation Space

The space shown in the figure is required in order to use this machine.

Air Ventilation

This machine emits a small amount of volatile compounds during printing and for some time after printing, which
may cause irritation of your eyes, nose, and throat. To use this machine, make sure to install ventilating equipment
to ensure adequate ventilation.
" P. 50 "5. Installation of Ventilating Equipment"
3,050 mm (120.1 in.)
2,050 mm (80.7 in.)
Unit space
1. Checks before Installation
Work space
2.Installation
23