Step 5: Attach The Label; Step 6: Connect The Power Cord And The Cable - Roland VersaUV LEC2-300 Setup Manual

2. Assembly and Ink Filling

Step 5: Attach the Label

This work is required when using the machine with four colors (CMYK).
Items Used in this Procedure
Included items

Step 6: Connect the Power Cord and the Cable

Procedure
A
Insert the cable clamp.
B
Connect both the power cord and the Ethernet cable (commercially available).
Use a power plug adapter if the electrical outlet is a two-prong outlet.
WARNING
WARNING
WARNING
34
2.Installation
Cartridge-slot label (for four colors)
Perform this task with all power switches left switched off.
Sudden movement of the machine may cause injury.
Connect to an electrical outlet that complies with this machine's ratings (for
voltage, frequency, and current).
Incorrect voltage or insufficient current may cause fire or electrical shock.
Connect the machine to ground.
This can prevent fire or electrical shock due to current leakage in the event of
malfunction.