Selecting Tracks; Fast Searching (Audible); Random Play (Mix); Scanning Tracks (Scan) - Blaupunkt Monterrey MP35 Operating Instructions Manual

CD MODE
You must not hinder or assist the drive
as it draws in the CD.
Gently close the control panel
whilst exerting a little pressure until
you feel it clicks into place.
CD playback begins.
Note:
The unit will remain off if the igni-
tion is off. To turn it on and play the
inserted CD, press button 1 once.
If a CD is already inserted in the drive
and the unit is playing Radio, CD
Changer or AUX mode.
Press the SRC button ; repeat-
edly until "CD" appears in the dis-
play.
Playback begins from the point at which
it was last interrupted.

Selecting tracks

Press one of the arrow buttons 6
to select the next or previous track.
If you press the
the current track will be played again
from the beginning.

Fast searching (audible)

To fast search backwards or forwards,
keep one of the
pressed until fast reversing / fast
forwarding begins.

Random play (MIX)

Press button 5 MIX 9.
"MIX CD" appears briefly in the display
and the MIX symbol lights up. The next
randomly selected track will then be
played.
14
button 6 once,
or
buttons 6
Stopping MIX
Press button 5 MIX 9 again.
"MIX OFF" appears briefly in the dis-
play and the MIX symbol disappears.

Scanning tracks (SCAN)

You can briefly play all the tracks on a
CD.
Press the MENU button 7 for
longer than two seconds.
The next track will then be played for
scantime as set in the "Setting the scant-
ime".
Note:
You can set the scantime. For fur-
ther details, please read the sec-
tion entitled "Setting the scantime"
in the "Radio mode" chapter.
Stopping SCAN and continuing
playback
To stop scanning, press the MENU
button 7.
The current track will then continue to
be played.

Repeating tracks (REPEAT)

If you want to repeat a track, press
button 4 RPT 9.
"RPT TRCK" appears briefly in the dis-
play and the RPT symbol lights up. The
track is repeated until you deactivate
RPT.
Cancelling repeat
If you want to stop the repeat func-
tion, press button 4 RPT 9 again.