Inserting/Removing The Memory Card; Selecting Tracks; Fast Searching; Interrupting Playback - Blaupunkt STOCKHOLM 230 DAB Operating Instructions Manual

Hide thumbs Also See for STOCKHOLM 230 DAB:
Table of Contents

Advertisement

If the USB data carrier is initially selected as
audio source, the data are read f irst.
Notes:
• If the connected USB data carrier cannot
be seen, "USB ERROR" is brief ly displayed.
• The time required for reading in the data
depends on the design and size of the USB
data carrier.
Removing a USB data carrier
Switch of the car sound system so that the
data carrier will be correctly unregistered.
Disconnect the USB data carrier.
After you pulled of the data carrier from the
USB port at the front of the device, close the
protective cap of the USB p

Inserting/removing the memory card

Inserting the memory card
Detach the control panel.
Insert the memory card with its labelled side
up and its contacts f irst into the card slot
until it clicks into place.
Attach the control panel.
After switch-on, the device automatically
selects the inserted memory card as audio
source. The data of the memory card are be-
ing read. Afterwards, the playback starts in
MP3 mode.
Notes:
• If the inserted memory card cannot be
played, "SD ERROR" is brief ly displayed.
• The time required for reading the card
depends on the design and size of the
memory card.
Removing the memory card
Detach the control panel.
Push on the memory card until it disengages.
Pull the memory card out of the card slot .
Attach the control panel.

Selecting tracks

Turn rotary control
clockwise or clockwise to change to the pre-
vious/next track.
Notes:
• If you turn rotary control
• If the current track plays longer than 3

Fast searching

.
o rt
:
Press the rotary control
The display brief y shows "CUE/REVIEW".
Turn the rotary control
position has been reached.
Note:
If you press the rotary control
display brief y shows "TRACK SELECT". By
turning the rotary control
dif erent track.

Interrupting playback

Press the 3 button
playback ("PAUSE") or to continue it.

Scanning all tracks

The scan function scans all available tracks.
Press the rotary control
onds to start the scan, or brief ly to continue
playing the currently scanned track.
During the scan, the display alternately dis-
plays "SCAN" and the current track number
or f le name.
Note:
The scan time can be adjusted (see the chap-
ter "User settings", section "Making settings
in the "VARIOUS" menu", menu item "SCAN
TIME").
CD/MP3/WMA/iPod mode
one notch counter-
7
notches counter-clockwise or clockwise,
you jump forward or reverse by the corre-
sponding number of tracks.
seconds and you turn rotary control
one notch counter-clockwise or clockwise,
the tracks starts playing again.
once.
7
until the desired
7
7
to interrupt the
for approx. 2 sec-
7
several
7
by
7
twice, the
7
, you select a
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents