Adjusting The Brightness; Setting The Colour Of The Display Illumination (Syracuse/Monterrey Mp35) - Blaupunkt Monterrey MP35 Operating Instructions Manual

DISPLAY BRIGHTNESS

Adjusting the brightness

(dimmer)
The display brightness will change when
the headlights are turned on/off if your
car sound system is connected as de-
scribed in the installation instructions
and your vehicle is equipped with the
appropriate connections. You can ad-
just the display brightness separately for
night and day in steps ranging from 1 -
9.
In addition, you can select the "AUTO
DIM" setting.
The "AUTO DIM" feature is used to ad-
just the car radio's illumination automat-
ically to suit the set cockpit illumination.
Setting "DIM DAY" or "DIM NIGHT"
Press the MENU button 7.
"MENU" appears in the display.
Press the or
edly until "DIM DAY" or "DIM
NIGHT" appears in the display.
Press the or
switch between the brightness lev-
els.
When you have finished making your
changes,
press the MENU button 7 twice.
button 6 repeat-
button 6 to
DISPLAY COLOUR
Setting the colour of the
display illumination
(Syracuse/Monterrey MP35)
You can adjust the colour of the display
illumination to suit the illumination of
your vehicle cockpit. The primary col-
ours red, green and blue (R-G-B) are
available for this.
Setting a colour for the display
illumination
Press the MENU button 7.
Press the or
edly until "DISP COL" appears in
the display.
Press the or
The menu for setting the colours is dis-
played. "R", "G" and "B" are displayed
with the current values (0 to 4). The "R"
setting flashes.
Press the or
edly until the setting that you want
is displayed after "R".
Press the or
move the selection cursor to the
position after the other colours ("G"
or "B").
Adjust the other colours to suit your
preferences.
When you have finished making your
changes,
press the MENU button 7 twice.
The settings are saved.
button 6 repeat-
button 6.
button 6 repeat-
button 6 to
25