Instantaneous Volume Reduction (Mute); Telephone Audio; Confirmation Beep - Blaupunkt Monterrey MP35 Operating Instructions Manual

ADJUSTING THE VOLUME
Instantaneous volume reduction
(mute)
This feature allows you to instantane-
ously reduce (mute) the volume to a lev-
el preset by you.
Briefly press button 1.
"MUTE" appears in the display.
To restore the volume,
press button 1 again.
Setting the mute level
You can set the unit's mute volume level.
Press the MENU button 7.
Press the or
edly until "MUTE LVL" appears in
the display.
Set the mute level using the
buttons 6.
When you have finished making your
changes,
press the MENU button 7 twice.

Telephone audio

If your car sound system is connected
to a mobile telephone, the sound sys-
tem's volume will be muted as soon as
you "pick up" the telephone. The tele-
phone call is then heard over the car
sound system's loudspeakers. This re-
quires that the mobile telephone be con-
nected to the car sound system as de-
scribed in the installation instructions.
You will need a cable for this with the
following Blaupunkt number: 7 607 001
503.
You can set the volume at which you
want telephone calls to be initially heard.
Press the MENU button 7.
10
button 6 repeat-
and
Press the or
edly until "TEL VOL" appears in the
display.
Set your preferred volume level us-
ing the or
When you have finished making your
changes,
press the MENU button 7 twice.
Note:
You can use the volume control 3
to adjust the volume of a telephone
call whilst the call is being heard.
You can adjust the tone and vol-
ume distribution settings for tele-
phone calls. For further details,
please read the chapter entitled
"Tone and volume distribution set-
tings". The settings can only be ad-
justed during a telephone call and
are stored for future telephone calls.

Confirmation beep

For some functions you will hear a con-
firmation beep if you keep a button
pressed for longer than two seconds.
For instance, after storing a radio sta-
tion to a station button you will hear a
confirmation beep. The beep can be
switched on/off.
Press the MENU button 7.
Press the or
edly until "BEEP" appears in the
display.
Use the or
between the options.
"OFF" means beep off, "ON" means the
beep is switched on.
Press the MENU button 7.
button 6 repeat-
button 6.
button 6 repeat-
button 6 to switch