Advertisement
Figure 15
1. Forward harness bracket
6
Connecting the Wire
Harness to the Tow Vehicle
No Parts Required
Procedure
Your tow vehicle needs a trailer 7-contact connector
with 4 sockets and 3 pins; refer to your authorized
Toro distributor for parts.
1.
Assemble the mower to the tow vehicle; refer to
the Operator's Manual for your machine.
2.
Plug the 7-contact connector of the wire harness
into the trailer connector of the tow vehicle
(Figure
16).
g280326
2. Harness push-in fastener
1. Trailer connector (4 socket
and 3 pin contacts)
2. 7-contact connector (wire
harness)
3.
Ensure that you have enough slack in the wire
harness to allow you to turn the tow vehicle and
mower without tensioning the harness.
4.
Bundle the remaining harness and secure it to
the harness bracket with a cable tie
8
Figure 16
3. Harness bracket (forward
position)
4. Cable tie
(Figure
g280315
16).
Advertisement
