Advertisement
5
Routing and Connecting
the Wire Harness
Parts needed for this procedure:
4
Cable ties
Routing and Connecting the
Harness at the Axle-Frame Tube
1.
Route the 7-contact connector of the wire
harness along the right frame tube as shown in
Figure
9.
1. Electrical
connectors—
TAIL LIGHT
(
) and
RIGHT
TAIL LIGHT
(
) (wire harness)
LEFT
2.
At the forward side of the axle-frame tube, plug
the 4-pin connector of the left taillight harness
(Figure
10) into the 4-socket connector of the
wire harness labeled
Figure 9
2. 7-contact connector (wire
harness)
(
).
TAIL LIGHT
LEFT
1. Holes—axle-frame tube 6
mm (1/4 inch)
2. Wire harness
3. 4-pin connector (right
taillight harness)
4. 4-socket connector—wire
harness
TAIL LIGHT
3.
Plug the 4-pin connector of the right taillight
harness
(Figure
of the wire harness labeled
4.
At the 4-socket connectors labeled
(
) and
LEFT
push-in fasteners into the 2 holes 6 mm (1/4
g280324
inch) in the front of the axle-frame tube
10).
6
Figure 10
5. Push-in fastener (harness)
6. 4-socket connector—wire
harness
TAIL LIGHT
7. 4-pin connector (left
taillight harness)
(
)
RIGHT
10) into the 4-socket connector
TAIL LIGHT
(
), insert the harness
TAIL LIGHT
LEFT
g280316
(
)
LEFT
(
).
RIGHT
TAIL LIGHT
(Figure
Advertisement
