Selecting the cinema mode
When you view a DVD (3:2 pulldown processed) from a DVD
player connected to the ColorStream (component video) or
DVI/HDCP inputs on the TV, smoother motion can be
obtained by setting the CINEMA MODE to FILM.
To set the CINEMA MODE to FILM:
1. Press MENU and open the VIDEO menu.
2. Highlight THEATER SETTINGS and press ENTER.
Video
Picture Settings
Theater Settings
Advanced Picture Settings
3. In the CINEMA MODE field, select FILM.
Theater Settings
Picture Size
Natural
Picture Scroll
0
Film
Cinema Mode
Display Format
1080i
Auto Aspect Ratio
On
Save
Done
Reset
4. To save your settings temporarily, highlight DONE and
press ENTER.
To save your settings permanently, highlight SAVE and
press ENTER.
To set the CINEMA MODE to VIDEO:
Select VIDEO in step 3 above.
Theater Settings
Picture Size
Natural
Picture Scroll
0
Video
Cinema Mode
Display Format
1080i
Auto Aspect Ratio
On
Save
Done
Reset
Chapter 8: Using the TV's features
Selecting the display format
(480p signals only)
You can use this feature to convert a 480p input signal to 540p
or 1080i.
To select the display format:
1. Press MENU and open the VIDEO menu.
2. Highlight THEATER SETTINGS and press ENTER.
Video
Picture Settings
Theater Settings
Advanced Picture Settings
3. In the DISPLAY FORMAT field, select either 540p or
1080i.
Theater Settings
Picture Size
Picture Scroll
Cinema Mode
Display Format
Auto Aspect Ratio
4. To save your settings temporarily, highlight DONE and
press ENTER.
To save your settings permanently, highlight SAVE and
press ENTER.
Note:
• Input signals other than 480p are automatically converted to 1080i.
• If you notice flicker in a 480p image, try setting the DISPLAY FORMAT
to 540p.
Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.
Natural
0
Video
1080i
On
Save
Done
Reset
67