Connecting A Dvd Player S-Video Video And A Vcr - Toshiba 51H93 Owner's Manual

Connecting a DVD player with S-video and a VCR
You will need:
five coaxial cables
one set of standard A/V cables
• If you have a mono VCR, connect L/MONO on the TV (VIDEO 2)
to your VCR's audio out jack using the white audio cable only.
one S-video cable
one pair of standard audio cables
Note:
• If your DVD player does not have S-video, use a standard video
cable instead. Do not connect an S-video cable and a standard
video cable to VIDEO 1 (or VIDEO 2) at the same time or the
picture performance will be unacceptable.
• If your DVD player has component video, see page 16.
• Do not connect the DVD player and VCR to the same set of A/V
inputs on the TV. (See the illustration, which shows the VCR
connected to VIDEO 1 on the TV, and the DVD player
connected to VIDEO 2.)
To view basic channels and access the TV's features:
Select the ANT 2 video input source.* Use the TV
controls to change channels and access the TV's features.
To view premium Cable channels:
Turn OFF the VCR. Select the ANT 1 video input source.*
Tune the TV to channel 3 or 4 (whichever channel is vacant
in your area). Use the Cable box controls to change
channels.
or...Turn ON the VCR. Tune the VCR to channel 3 or 4
(whichever channel is vacant in your area). Select the
VIDEO 1 video input source.* Use the Cable box controls
to change channels.
To view the DVD player:
Select the VIDEO 2 video input source.*
To view the VCR:
Select the VIDEO 1 video input source on the TV.*
or... Tune the TV to channel 3 or 4 (whichever channel is vacant
in your area) and select the ANT 1 video input source on
the TV.*
_____________
*
To select the video input source, press INPUT on the remote control
(see page 61). To program the TV remote control to operate other
devices, see pages 30 to 33.
The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.
Chapter 2: Connecting your TV
Connect the IR
blaster cable to
the G-LINK jack
(see page 25)
Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.
Cable box
IN OUT
CH 3
OUT
CH 4
Stereo VCR
IN from ANT
CH 3
CH 4
OUT to TV
TV
)
ANT( 75
G-LINK
ANT-1 ANT-2
REC OUT
VIDEO L R
AUDIO
IN
COLOR COLOR
VIDEO 1 VIDEO 2
STREAM STREAM
HD-1 HD-2
Y Y
S-VIDEO
P P
B B
OUT
VIDEO
P P
R R VIDEO
L/ L/
MONO MONO
L L
AUDIO AUDIO AUDIO
AUDIO
R R R R
DVD player with S-video
S-VIDEO
VIDEO
OUT OUT
From antenna or Cable TV
Cable splitter IN
OUT
VIDEO AUDIO
L R
IN
OUT
L R
DVI/HDCP IN TheaterNet
IEEE1394
1
IEEE1394
2
DIGITAL
AUDIO OUT
AUDIO
R L
AUDIO CENTER
CHANNEL IN
TheaterNet
L
VAR
AUDIO
ON OFF
R
IR OUT
AUDIO
OUT
L
R
15