Using The Auto Aspect Ratio Feature; Selecting The Cinema Mode (480I Signals Only); Hm116 (E/F) Web 213:276 - Toshiba 62HM116 Operating Manual

HM116_EN.book Page 39 Monday, June 19, 2006 7:30 PM

Using the auto aspect ratio feature

When the auto aspect ratio feature is set to On, the TV will
automatically select the picture size when one of the following
input sources is received:
A 480i signal from the VIDEO 1, VIDEO 2, ColorStream
•
HD-1, or ColorStream HD-2 input.
A 1080i, 480i, 480p, or 720p signal from the HDMI input.
•
Aspect ratio of Automatic aspect size (automatically
signal source selected when Auto Aspect is On)
4:3 normal Natural (with sidebars)
4:3 letter box TheaterWide 2
16:9 full Full
Not defined
(no ID-1 data The current picture size you set under
or HDMI "Selecting the picture size" on page 37.
aspect data)
Note: The auto aspect ratio feature is not applicable to
antenna or cable input sources.
To turn on the auto aspect ratio feature:
1
Press Y and open the Video menu.
2
Highlight Theater Settings and press T.
3
In the Auto Aspect Ratio field, select On.
Theater Settings
Picture Size
Picture Scroll
Cinema Mode
Auto Aspect Ratio
Reset
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
To turn off the auto aspect ratio feature:
Select Off in step 3 above.
Chapter 5: Using the TV's features
Natural
--
Film
On
Done
Selecting the cinema mode
(480i signals only)
When you view a DVD (480i signal; 3:2 pulldown processed)
from a DVD player connected to the VIDEO 1, VIDEO 2,
ColorStream HD-1, ColorStream HD-2 (component
video), or HDMI input on the TV, smoother motion can be
obtained by setting the Cinema Mode to Film.
To set the Cinema Mode to Film:
1
Press Y and open the Video menu.
2
Highlight Theater Settings and press T.
3
In the Cinema Mode field, select Film.
Theater Settings
Picture Size
Picture Scroll --
Cinema Mode
Auto Aspect Ratio
Reset
4
To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
To set the Cinema Mode to Video:
Select Video in step 3 above.
Natural
Film
On
Done
39

HM116 (E/F) Web 213:276