Adjusting The Picture; Adjusting The Picture Quality; Resetting The Picture Settings - Toshiba 51H93 Owner's Manual

Adjusting the picture

Selecting the picture mode
You can select your desired picture settings from four picture
modes, as described below.
Mode Picture Quality
Sports Bright and dynamic picture (factory setting)
Standard Standard picture settings (factory setting)
Movie Lower contrast for darkened room (factory setting)
Preference Your personal preferences
To select the picture mode:
1. Press MENU and open the VIDEO menu.
2. Highlight PICTURE SETTINGS and press ENTER.
Video
Picture Settings
Theater Settings
Advanced Picture Settings
3. Press z to highlight the MODE field, and then x • to
select the mode you prefer.
Picture Settings ANT 1
Mode Preference
Contrast 50
Brightness 50
50
Color
Tint 0
50
Sharpness
Save Done Reset
4. To temporarily save the mode you selected, highlight
DONE and press ENTER.
To permanently save the mode you selected, highlight
SAVE and press ENTER.
Note:
• The picture mode you selected is for the current input
selection only (ANT 1 in the example above). You can select
a different picture mode for each input selection.
• If you select one of the factory-set picture modes (SPORTS,
STANDARD, or MOVIE) and then change a picture quality
setting (for example, increase the contrast), the picture mode
automatically changes to PREFERENCE in the Picture
Settings menu.
72
Chapter 8: Using the TV's features

Adjusting the picture quality

You can adjust the picture quality (contrast, brightness, color,
tint, and sharpness) to your personal preferences.
To adjust the picture quality:
1. Press MENU and open the VIDEO menu.
2. Highlight PICTURE SETTINGS and press ENTER.
3. Press z or y to select the picture quality you want to adjust
4. To temporarily save the new settings, highlight DONE and
The picture qualities you adjusted are automatically saved in the
PREFERENCE mode (see "Selecting the picture mode" above).

Resetting the picture settings

To reset the picture settings to
their factory values:
Highlight RESET in the Picture
Settings menu and press
ENTER.
Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.
Video
Picture Settings
Theater Settings
Advanced Picture Settings
(CONTRAST, BRIGHTNESS, COLOR, TINT, or
SHARPNESS), and then x and • to adjust the setting, as
described in the table below.
Picture Settings ANT 1
Mode
Sports
Contrast 100
50
Brightness
Color 50
Tint 0
Sharpness 50
Save Done Reset
x Pressing •
Selection
contrast lower
brightness darker
color paler
tint reddish
sharpness softer
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
Note: The settings you selected are for the current input selection
only (ANT 1 in the example above). You can select different
settings for each input selection.
Note: This resets the pictures
settings for the current input source
only (ANT 1 in this example).
higher
lighter
deeper
greenish
sharper
Picture Settings ANT 1
Mode
Sports
100
Contrast
Brightness 50
50
Color
Tint 0
Sharpness 50
Save Done Reset