Chapter 2: Connecting Your Tv; Tv Front Touchpad And Side Panel Controls And Connections - Toshiba TheaterWide 46HM95 Owner's Manual

2
Connecting your TV

TV front touchpad and side panel controls and connections

Front of TV
Remote sensor
1
Front touchpad*
EXIT
3
GUIDE
9
TV/VIDEO Channel zy
2
*Gently touch the printed keys on the touchpad.
**The MENU button on the TV front touchpad functions as the
ENTER button when a menu is on-screen.
1
(behind the screen) — Point the remote
Remote sensor
control toward this area of the TV screen. See "Remote
control effective range" on page 27.
2
— Repeatedly press to change the source you are
TV/VIDEO
viewing (ANT 1, ANT 2, VIDEO 1, VIDEO 2, VIDEO 3,
HDMI 1, HDMI 2, ColorStream HD1, ColorStream
HD2).
3
— Press to close an on-screen menu instantly.
EXIT
4
yzx • — When a menu is on-screen, these
ARROWS
buttons function as up/down/left/right menu navigation
buttons.
5
— Press to access the menu system (see
MENU (ENTER)
page 35). When a menu is on-screen or the TV Guide
On Screen ® program guide is open, the MENU button on
the front touchpad functions as the ENTER button.
6
— Press to turn the TV on and off.
POWER
Note: If the TV stops responding to the controls on the remote
control or TV front panel and you cannot turn off the TV, press
and hold the POWER button on the TV front panel for 5 or more
seconds to reset the TV.
7
yz — When no menu is on-screen, these
CHANNEL
buttons change the channel (programmed channels only; see
page 42). When a menu is on-screen, these buttons function
as up/down menu navigation buttons.
HM95_R2_009-11_061505 9
TV/VIDEO EXIT CHANNEL VOLUME MENU POWER
zyx •
MENU (ENTER)**
4
5
Green/Red LEDs
Volume x •
7 8
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
POWER
6
Side of TV
VIDEO-3 IN
0
8
x • — When no menu is on-screen, these
VOLUME
buttons adjust the volume level. When a menu is on-screen,
these buttons function as left/right menu navigation
buttons.
9
— Press to access the TV Guide On Screen
GUIDE
program guide. (See page 53 for details on using the
program guide.)
0
Green and Red LEDs
When the green LED lights solid (not blinking), it indicates
that recording is in progress.
When the red LED lights solid (not blinking), it indicates
that the TV power cord is plugged in.
See "LED indications" on page 99 for additional
information.
!¡
— The side panel A/V connections are referred to
VIDEO-3
as "VIDEO 3" and include standard A/V connections plus
optional S-video. (The VIDEO 1 and VIDEO 2 A/V
connections are on the TV's back panel; see page 10.
!™
Memory card slots
the memory card slots to view JPEG files (such as photos) as
a "slide show" on your TV or listen to MP3 audio files (see
page 87).
6/27/05, 6:44 PM
Side panel
Memory card
!¡
slots
!™
®
— Insert a memory card into one of
9