Power Supply Unit - HP ProLiant MicroServer Maintenance And Service Manual

○
Grasp the fan by the two handles, and lift it up from the chassis (3).
Remove the system fan from its protective packaging.
3.
Install the new system fan.
4.
○
Route the fan cable through the vacated fan bracket.
○
Insert the fan in the fan bracket (1).
○
Fasten the 4 screws (2)
○
Connect the fan cable to its corresponding board connector (3).
Perform the post-installation procedure.
5.

Power supply unit

PSU of this server is Standard PSU or other compatible supplies with PFC (power factor correction)
function.
Removal and replacement procedures 56