Advertisement
◆
Power Supply Plug Wiring (PS-V10S / PS-V10M)
1. Disconnect the 24 V power supply plug connected to the 24 V Power Supply Option.
Figure 21
2. Use a flat-blade screwdriver to loosen the screws on the 24 V power supply plug.
Connect wiring to the 24 V, 0, and FE terminals, and tighten the terminal screws to hold
wiring in place.
Refer to Wire Gauges and Tightening Torque on page
NOTICE: Properly connect an external 24 V power line to the power supply plug.
Supply Option Specifications on page
incorrect terminal connections.
Figure 22
Preparing Wire Ends
Avoid fraying wire
strands when stripping
insulation from wire.
3. Insert the 24 V power supply plug back into its mating connector on the 24 V Power Supply
Option.
YASKAWA ELECTRIC TOBP C730600 27B V1000 Option PS-V10 Installation Manual
Figure 21 Disconnecting the Power Supply Plug
36. Improper wiring practices could result in option damage due to
Blade width
Blade thickness
5.5 mm
Figure 22 Wiring the 24 V Power Supply Plug
5 Installation Procedure
2.5 mm max.
0.6 mm max.
28.
Refer to 24 V Power
27
Advertisement
